Multiple uses of Pcb copy
Limitation
PCB board is PCB copy board, It is also PCB clone, which is PCB reverse
engineering of design.It is to first
withdraw the components on the PCB circuit board to assemble a BOM list, PCB reverse engineering empty
board into a picture, and reinstate it to a pcb board drawing file through the
copying software; computing the pcb board taking file to the PCB board factory
to make the board ( PCBA), and then add parts
which is exactly the same PCB circuit board as the genuine PCB circuit
board. Any electronic product copying and electronic product cloning can be
completed through PCB copy board
technology.
The
motive of PCB copy is to modify the
PCB, which is to be done alter
technology research upon the PCB board. After detailing to a lot of
information, the system of PCB reverse engineering is wayed as follows:
The
preliminary step is to get a PCB copy
reverse engineering, first record the
model, framework, and place all the critical parts on paper, mainly the direction of the diode, the tertiary
tube, and the management of the IC gap. It is finest to use a digital camera to
take two photos of the location of essential parts.
The
second steg is to detach all the components and take out the tin in the PAD hole. Wash the PCB with alcohol and put it in the
scanner. When the scanner scans, you are needed to lift the scanned pixels slightly to get a clearer image.
The
last stage is to alter the contrast and
brightness of the canvas to make the part with copper film and the part without
copper film have a strong contrast, and then spin the second image into black
and white, and check if the lines are clear. If not, do this step again.
These
circuit boards offer a lot of advantage. So, they are a perfect choice for the
manufacturer of different types of apparatus, instruments and electronic
components.
评论
发表评论